Spectragen® – Liquid Disinfectant
[gallery ids="6824,6822"]
Effective on any kind of surfaces
Used at the rate of 1% corresponding to the threefold licence, SPECTRAGEN® secures disinfection in all situations (box, feeder, basement,...).
Thanks to over 3500 samples, SPECTRAGEN® is proved to be effective on every surfaces of livestock buildings : smooth concrete, rough concrete, fibrocement, wood, metal, plastic, sandwich panel.
[download id="8255"]
[download id="8259"]
APPROVED
Bactericidal (EN 14349)
(10°C, 30 minutes, high-level soiling conditions)
- Salmonella typhimurium at 0,2 %
- Salmonella enteritidis at 0,2 %
- Salmonella senftenberg at 0,05 %
- Listeria monocytogenes at 0,05 %
Virucidal (EN 14675)
(10°C, 30 minutes, high-level soiling conditions)
- Myxomatosis virus at 0,2 %
- H5N1 influenza virus at 0,4 %
- Newcastle Disease at 0,1 %
- Duck Parvovirus at 0,7 %
- Porcine Circovirus at 0.7%
- PRRS at 0.4%
- PED virus at 0.4%
Fongicidal (EN 13697)
with veterinary area conditions (10°C, 30 minutes, high-level soiling conditions)
- Â Aspergillus fumigatus at 1 %
Directions
Disinfection on hard surfaces in livestock areas : Use water solution of SPECTRAGEN® on previously cleaned and rinsed surfaces. Ensure that livestock and feed are removed from the area. For a contact time of 30 minutes, the recommended dose is from 0.2% to 1%.
By Spraying : Use 200 to 400 l of solution per 1000 m² to be disinfected. Leave on for at least
30 minutes. After treatment, ventilate buildings and enclosed spaces and wait for the complete drying of surfaces before relocation of animals.
By fogging : Use 1 ml of SPECTRAGEN® per m3 (about 3 l for a building of 1000 m²). leave on for 4 hours with the fully enclosed building (no human or animal presence). After treatment, ventilate the buildings for at least 2 hours. Do not penetrate into the treated area as long as the fog is not lifted.
Disinfection on hard surfaces in food processing areas : Use a 0.2% of SPECTRAGEN® water solution. Leave on for at least 5 minutes.
Rinse necessarily to water surfaces in contact with foodstuffs. After use, clean application equipment with water.
For your safety, use equipments for individual protection
«Use biocides with precaution. Always read the label and product information before use». Art. L522 - 14 of French environmental code.
Material Safety Data Sheet available at
www.syntheseelevage.com
Composition
- Didecyldimethylammonium chloride (CAS 7173-51-5) 6,63 %
- Alkyldimethylbenzylammonium chloride (CAS 68424-85-1) 18,96 %
- Glutaraldehyde (CAS 111-30-8) 16,11 %
French authorization n° BTR0323
Breeding Food processing industry
Inventoried as a biocide  under n° 44041.
[gallery ids="6824,6822"]
Measure back fat and muscle precisely during ultrasonography, using this Wireless Ultrasound Scanner. For exams up to 14 "(35 cm) deep.
